Sinvesta solar array on a Sydney hillside home at sunset.

Our work

2,500 projects. Here are some of them.

Every photograph on this page is a Sinvesta installation — our panels, our inverters, our cable runs. Nothing here is a stock image.

Rooftop arrays

Residential & commercial installs.

Solar array on a hillside home at sunset, Sydney.
Residential

Hillside home, north shore

Roof-hugging array on a steep site, laid out to work around skylights and a split roof line.

Commercial solar array on a metal warehouse roof.
Commercial

Warehouse roof, Klip-Lok mount

Large-format array on trapezoidal metal decking, clamped without a single roof penetration.

Residential solar array photographed at dusk.
Residential

Family home, western Sydney

A larger family array sized around ducted air-conditioning and a pool pump.

Solar panels installed on a tiled roof.
Residential

Tile roof install

Tile-hook mounting done the slow way — lifted, hooked, and re-bedded so the roof still sheds water.

Solar array across a tiled residential roof.
Residential

Full northern pitch

Every usable square metre of the north face, laid out in clean unbroken rows.

Solar panels on a low-pitch residential roof.
Residential

Low-pitch roof

Low-profile rail system keeping the array tight to a shallow roof line.

Inverters & switchgear

The part most installers hide around the side.

You can judge a solar company by its conduit. Straight runs, level mounting, labelled isolators and tidy terminations — this is the work that decides whether a system lasts twenty years or fails in five.

Storage & charging

Batteries and EV chargers in the wild.

Two Sungrow battery stacks and inverter installed beside a home.
Battery

Twin Sungrow stacks

Two stacked battery banks with hybrid inverter, set on a level plinth clear of the path.

Tall modular battery stack installed against a dark rendered wall.
Battery

High-capacity modular stack

A tall modular bank for a high-consumption household, expandable module by module.

Tesla Wall Connector installed with Sinvesta Group branding.
EV

Tesla Wall Connector

Wall Connector on a dedicated circuit with weatherproof isolator above, cable dressed and clipped.

Two Tesla Powerwall units and a Fronius inverter wall-mounted in a garage by Sinvesta Group.
Battery

Twin Tesla Powerwall

Two Powerwall units either side of a Fronius inverter, mounted square and plumb with the run kept off the floor.

Stacked Sungrow battery installed against a brick wall with isolator and hazard signage.
Battery

Sungrow stack, brick wall

Stacked Sungrow storage on a levelled plinth — isolator, conduit and full hazard signage to standard.

Proof it works

Output from systems we commissioned.

These are live screens from Sinvesta installations, not marketing mock-ups. Production in orange, what the household actually used in blue.

Monitoring app showing 13.7 kW current output, 99 percent self-consumption and 100 percent self-sufficiency.

13.7 kW live · 99% self-consumption · 100% self-sufficient

Daily production chart showing 90.24 kWh produced and 70.29 kWh consumed.

90.24 kWh produced · 60.21 kWh self-consumed · one day

Your roof next

Want work like this on your place?

Send through your last power bill and we'll come back with a fixed written quote — the right system size, the real output, and the rebate already taken off.

Call now
Get a quoteFree, no obligation WhatsApp us0415 301 979